Free Hope SVG

Hope with a heart SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hope with a heart, as a solid black shape — Hope with a heart. The preview is the SVG file itself.

“Hope” with a heart above the words, which are set in Lobster. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size	100 × 99 mm (3.94 × 3.88 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	7: 4 outer edges and 3 cut-outs
Cut length	796 mm at this size
Narrowest part	2.1 mm at this size
Nodes	106 curve and line segments

Measured from the file. PNG: 2,000 × 1,973 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.99 in (25 × 25 mm)	0.53 mm	202 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.97 in (51 × 50 mm)	1.1 mm	404 mm	25	Vinyl, card and thin sheet
3 × 2.96 in (76 × 75 mm)	1.6 mm	607 mm	9	Vinyl, card and thin sheet
4 × 3.94 in (102 × 100 mm)	2.1 mm	809 mm	4	Vinyl, card and thin sheet
6 × 5.92 in (152 × 150 mm)	3.2 mm	1,213 mm	1	Any material, including 3 mm wood and acrylic
8 × 7.89 in (203 × 200 mm)	4.3 mm	1,617 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.83 in (305 × 301 mm)	6.4 mm	2,426 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hope SVG files

← Hope with a drop shadow All 13 Hope designs Hope in Pacifico →