Hope with a swash underline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Hope” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.
What is in the file
| Size | 100 × 62 mm (3.94 × 2.45 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 8: 3 outer edges and 5 cut-outs |
| Cut length | 788 mm at this size |
| Narrowest part | 2.6 mm at this size |
| Nodes | 178 curve and line segments |
Measured from the file. PNG: 2,000 × 1,275 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.62 in (25 × 16 mm) | 0.66 mm | 200 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.25 in (51 × 32 mm) | 1.3 mm | 400 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.87 in (76 × 47 mm) | 2 mm | 600 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.49 in (102 × 63 mm) | 2.6 mm | 801 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.74 in (152 × 95 mm) | 4 mm | 1,201 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.98 in (203 × 127 mm) | 5.3 mm | 1,601 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.48 in (305 × 190 mm) | 7.9 mm | 2,402 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Hope SVG files
-
Hope with hearts Solid · 9 pieces
-
Hope outline lettering Outline · 7 pieces
-
Hope stencil plate Solid · one piece
-
Hope with a drop shadow Layered · 3 pieces
-
Hope with a heart Solid · 4 pieces
-
Hope in Pacifico Solid · 2 pieces
-
Hope in Lobster Solid · 3 pieces
-
Hope in Kaushan Script Solid · 4 pieces
← Hope in block capitals All 13 Hope designs Hope with hearts →