Free Hope SVG

Hope with hearts SVG

Hope with hearts, as a solid black shape — Hope with hearts. The preview is the SVG file itself.

“Hope” in Lobster with a row of three hearts above the words and three below, the middle one larger. The hearts are loose pieces, spaced to the width of the lettering.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 81 mm (3.94 × 3.19 in), scales to any size
Pieces	9 separate pieces
Outlines to cut	12: 9 outer edges and 3 cut-outs
Cut length	828 mm at this size
Narrowest part	2.4 mm at this size
Nodes	194 curve and line segments

Measured from the file. PNG: 2,000 × 1,633 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.81 in (25 × 21 mm)	0.61 mm	210 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.62 in (51 × 41 mm)	1.2 mm	421 mm	30	Vinyl, card and thin sheet
3 × 2.43 in (76 × 62 mm)	1.8 mm	631 mm	12	Vinyl, card and thin sheet
4 × 3.24 in (102 × 82 mm)	2.4 mm	841 mm	6	Vinyl, card and thin sheet
6 × 4.85 in (152 × 123 mm)	3.7 mm	1,262 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.47 in (203 × 164 mm)	4.9 mm	1,682 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.71 in (305 × 247 mm)	7.3 mm	2,524 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hope SVG files

← Hope with a swash underline All 12 Hope designs Hope outline lettering →