Free Hello World SVG

Hello World stencil plate SVG

Hello World stencil plate, as a solid black shape — Hello World stencil plate. The preview is the SVG file itself.

A rounded plate with “HELLO WORLD” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 76 mm (3.94 × 2.99 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	11: 1 outer edge and 10 cut-outs
Cut length	1,405 mm at this size
Narrowest part	1.7 mm at this size
Nodes	215 curve and line segments

Measured from the file. PNG: 2,000 × 1,538 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.76 in (25 × 19 mm)	0.43 mm	357 mm	120	Too fine for most machines
2 × 1.52 in (51 × 39 mm)	0.86 mm	714 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.28 in (76 × 58 mm)	1.3 mm	1,071 mm	12	Vinyl, card and thin sheet
4 × 3.04 in (102 × 77 mm)	1.7 mm	1,427 mm	6	Vinyl, card and thin sheet
6 × 4.56 in (152 × 116 mm)	2.6 mm	2,141 mm	2	Vinyl, card and thin sheet
8 × 6.08 in (203 × 154 mm)	3.5 mm	2,855 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.12 in (305 × 232 mm)	5.2 mm	4,282 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello World SVG files

← Hello World outline lettering All 12 Hello World designs Hello World with a drop shadow →