Hello World with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Hello World” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 89 mm (3.94 × 3.48 in), scales to any size |
|---|---|
| Pieces | 5 separate pieces |
| Outlines to cut | 27: 5 outer edges and 22 cut-outs |
| Cut length | 2,146 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 497 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,779 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.89 in (25 × 22 mm) | 0.43 mm | 545 mm | 110 | Too fine for most machines |
| 2 × 1.77 in (51 × 45 mm) | 0.86 mm | 1,090 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.66 in (76 × 67 mm) | 1.3 mm | 1,635 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.54 in (102 × 90 mm) | 1.7 mm | 2,180 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.31 in (152 × 135 mm) | 2.6 mm | 3,271 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.08 in (203 × 180 mm) | 3.5 mm | 4,361 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.62 in (305 × 270 mm) | 5.2 mm | 6,541 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Hello World SVG files
-
Hello World with a pair of baby feet Solid · 19 pieces
-
Hello World in Pacifico Solid · 3 pieces
-
Hello World in Lobster Solid · 5 pieces
-
Hello World in Kaushan Script Solid · 9 pieces
-
Hello World in Lilita One Solid · 10 pieces
-
Hello World in Alfa Slab One Solid · 10 pieces
-
Hello World in Amatic SC Solid · 10 pieces
-
Hello World in block capitals Solid · 10 pieces
← Hello World stencil plate All 13 Hello World designs Hello World with a pair of baby feet →