Free Hello World SVG

Hello World in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hello World in Alfa Slab One, as a solid black shape
Hello World in Alfa Slab One. The preview is the SVG file itself.

“Hello World” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 61 mm (3.94 × 2.4 in), scales to any size
Pieces10 separate pieces
Outlines to cut14: 10 outer edges and 4 cut-outs
Cut length966 mm at this size
Narrowest part3.4 mm at this size
Nodes171 curve and line segments

Measured from the file. PNG: 2,000 × 1,248 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.61 in (25 × 15 mm)0.86 mm245 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.22 in (51 × 31 mm)1.7 mm491 mm40Vinyl, card and thin sheet
3 × 1.83 in (76 × 46 mm)2.6 mm736 mm18Vinyl, card and thin sheet
4 × 2.44 in (102 × 62 mm)3.5 mm981 mm8Any material, including 3 mm wood and acrylic
6 × 3.65 in (152 × 93 mm)5.2 mm1,472 mm3Any material, including 3 mm wood and acrylic
8 × 4.87 in (203 × 124 mm)6.9 mm1,963 mm2Any material, including 3 mm wood and acrylic
12 × 7.31 in (305 × 186 mm)10 mm2,944 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello World SVG files

← Hello World in Lilita One All 13 Hello World designs Hello World in Amatic SC →