Free Hello World SVG

Hello World in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hello World in Amatic SC, as a solid black shape
Hello World in Amatic SC. The preview is the SVG file itself.

“Hello World” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size85 × 100 mm (3.34 × 3.94 in), scales to any size
Pieces10 separate pieces
Outlines to cut14: 10 outer edges and 4 cut-outs
Cut length1,417 mm at this size
Narrowest part1.5 mm at this size
Nodes386 curve and line segments

Measured from the file. PNG: 1,710 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.85 × 1 in (22 × 25 mm)0.38 mm360 mm110Too fine for most machines
1.7 × 2 in (43 × 51 mm)0.76 mm720 mm30Fine detail: vinyl and paper only, weed with care
2.55 × 3 in (65 × 76 mm)1.1 mm1,080 mm12Vinyl, card and thin sheet
3.4 × 4 in (86 × 102 mm)1.5 mm1,440 mm6Vinyl, card and thin sheet
5.09 × 6 in (129 × 152 mm)2.3 mm2,160 mm2Vinyl, card and thin sheet
6.79 × 8 in (173 × 203 mm)3 mm2,879 mm1Any material, including 3 mm wood and acrylic
10.19 × 12 in (259 × 305 mm)4.6 mm4,319 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello World SVG files

← Hello World in Alfa Slab One All 13 Hello World designs Hello World in block capitals →