Free Hello Pumpkin SVG

Hello Pumpkin stencil plate SVG

Hello Pumpkin stencil plate, as a solid black shape — Hello Pumpkin stencil plate. The preview is the SVG file itself.

A rounded plate with “HELLO PUMPKIN” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 70 mm (3.94 × 2.74 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	13: 1 outer edge and 12 cut-outs
Cut length	1,369 mm at this size
Narrowest part	1.7 mm at this size
Nodes	249 curve and line segments

Measured from the file. PNG: 2,000 × 1,417 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.7 in (25 × 18 mm)	0.43 mm	348 mm	130	Too fine for most machines
2 × 1.39 in (51 × 35 mm)	0.86 mm	695 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.09 in (76 × 53 mm)	1.3 mm	1,043 mm	15	Vinyl, card and thin sheet
4 × 2.79 in (102 × 71 mm)	1.7 mm	1,391 mm	8	Vinyl, card and thin sheet
6 × 4.18 in (152 × 106 mm)	2.6 mm	2,086 mm	2	Vinyl, card and thin sheet
8 × 5.58 in (203 × 142 mm)	3.5 mm	2,782 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.36 in (305 × 212 mm)	5.2 mm	4,173 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello Pumpkin SVG files

← Hello Pumpkin outline lettering All 12 Hello Pumpkin designs Hello Pumpkin with a drop shadow →