Free Hello Pumpkin SVG

Hello Pumpkin in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hello Pumpkin in Amatic SC, as a solid black shape
Hello Pumpkin in Amatic SC. The preview is the SVG file itself.

“Hello Pumpkin” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 84 mm (3.94 × 3.32 in), scales to any size
Pieces12 separate pieces
Outlines to cut15: 12 outer edges and 3 cut-outs
Cut length1,458 mm at this size
Narrowest part1.3 mm at this size
Nodes452 curve and line segments

Measured from the file. PNG: 2,000 × 1,698 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.84 in (25 × 21 mm)0.33 mm370 mm110Too fine for most machines
2 × 1.69 in (51 × 43 mm)0.66 mm741 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.53 in (76 × 64 mm)0.99 mm1,111 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.37 in (102 × 86 mm)1.3 mm1,481 mm6Vinyl, card and thin sheet
6 × 5.06 in (152 × 128 mm)2 mm2,222 mm2Vinyl, card and thin sheet
8 × 6.74 in (203 × 171 mm)2.6 mm2,963 mm1Vinyl, card and thin sheet
12 × 10.12 in (305 × 257 mm)4 mm4,444 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello Pumpkin SVG files

← Hello Pumpkin in Alfa Slab One All 13 Hello Pumpkin designs Hello Pumpkin in block capitals →