Free Hello Pumpkin SVG

Hello Pumpkin in Alfa Slab One SVG

Hello Pumpkin in Alfa Slab One, as a solid black shape
Hello Pumpkin in Alfa Slab One. The preview is the SVG file itself.

“Hello Pumpkin” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 46 mm (3.94 × 1.81 in), scales to any size
Pieces13 separate pieces
Outlines to cut17: 13 outer edges and 4 cut-outs
Cut length832 mm at this size
Narrowest part2 mm at this size
Nodes428 curve and line segments

Measured from the file. PNG: 2,000 × 960 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.46 in (25 × 12 mm)0.51 mm211 mm180Fine detail: vinyl and paper only, weed with care
2 × 0.92 in (51 × 23 mm)1 mm423 mm50Vinyl, card and thin sheet
3 × 1.38 in (76 × 35 mm)1.5 mm634 mm21Vinyl, card and thin sheet
4 × 1.84 in (102 × 47 mm)2 mm845 mm10Vinyl, card and thin sheet
6 × 2.75 in (152 × 70 mm)3 mm1,268 mm4Any material, including 3 mm wood and acrylic
8 × 3.67 in (203 × 93 mm)4.1 mm1,691 mm3Any material, including 3 mm wood and acrylic
12 × 5.51 in (305 × 140 mm)6.1 mm2,536 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello Pumpkin SVG files

← Hello Pumpkin in Lilita One All 12 Hello Pumpkin designs Hello Pumpkin in Amatic SC →