Free Hello My Name Is SVG

Hello My Name Is stencil plate SVG

Hello My Name Is stencil plate, as a solid black shape
Hello My Name Is stencil plate. The preview is the SVG file itself.

A rounded plate with “HELLO MY NAME IS” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 65 mm (3.94 × 2.56 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length1,268 mm at this size
Narrowest part1.5 mm at this size
Nodes271 curve and line segments

Measured from the file. PNG: 2,000 × 1,329 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.65 in (25 × 17 mm)0.38 mm322 mm140Too fine for most machines
2 × 1.3 in (51 × 33 mm)0.76 mm644 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.95 in (76 × 50 mm)1.1 mm966 mm15Vinyl, card and thin sheet
4 × 2.6 in (102 × 66 mm)1.5 mm1,288 mm8Vinyl, card and thin sheet
6 × 3.91 in (152 × 99 mm)2.3 mm1,932 mm2Vinyl, card and thin sheet
8 × 5.21 in (203 × 132 mm)3 mm2,577 mm2Any material, including 3 mm wood and acrylic
12 × 7.81 in (305 × 198 mm)4.6 mm3,865 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello My Name Is SVG files

← Hello My Name Is outline lettering All 12 Hello My Name Is designs Hello My Name Is with a drop shadow →