Free Hello My Name Is SVG

Hello My Name Is in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hello My Name Is in Pacifico, as a solid black shape
Hello My Name Is in Pacifico. The preview is the SVG file itself.

“Hello My Name Is” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 53 mm (3.94 × 2.07 in), scales to any size
Pieces6 separate pieces
Outlines to cut15: 6 outer edges and 9 cut-outs
Cut length821 mm at this size
Narrowest part1.1 mm at this size
Nodes355 curve and line segments

Measured from the file. PNG: 2,000 × 1,090 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.53 in (25 × 13 mm)0.28 mm209 mm160Too fine for most machines
2 × 1.05 in (51 × 27 mm)0.56 mm417 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.58 in (76 × 40 mm)0.84 mm626 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.11 in (102 × 54 mm)1.1 mm834 mm10Vinyl, card and thin sheet
6 × 3.16 in (152 × 80 mm)1.7 mm1,251 mm3Vinyl, card and thin sheet
8 × 4.22 in (203 × 107 mm)2.2 mm1,668 mm2Vinyl, card and thin sheet
12 × 6.32 in (305 × 161 mm)3.4 mm2,502 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello My Name Is SVG files

← Hello My Name Is with a star All 13 Hello My Name Is designs Hello My Name Is in Lobster →