Free Hello My Name Is SVG

Hello My Name Is in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hello My Name Is in Lobster, as a solid black shape
Hello My Name Is in Lobster. The preview is the SVG file itself.

“Hello My Name Is” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 51 mm (3.94 × 2 in), scales to any size
Pieces8 separate pieces
Outlines to cut14: 8 outer edges and 6 cut-outs
Cut length886 mm at this size
Narrowest part0.8 mm at this size
Nodes253 curve and line segments

Measured from the file. PNG: 2,000 × 1,056 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.51 in (25 × 13 mm)0.2 mm225 mm170Too fine for most machines
2 × 1.02 in (51 × 26 mm)0.41 mm450 mm50Too fine for most machines
3 × 1.53 in (76 × 39 mm)0.61 mm675 mm21Fine detail: vinyl and paper only, weed with care
4 × 2.04 in (102 × 52 mm)0.81 mm900 mm10Fine detail: vinyl and paper only, weed with care
6 × 3.05 in (152 × 78 mm)1.2 mm1,350 mm3Vinyl, card and thin sheet
8 × 4.07 in (203 × 103 mm)1.6 mm1,800 mm2Vinyl, card and thin sheet
12 × 6.11 in (305 × 155 mm)2.4 mm2,701 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello My Name Is SVG files

← Hello My Name Is in Pacifico All 13 Hello My Name Is designs Hello My Name Is in Kaushan Script →