Free Hello My Name Is SVG

Hello My Name Is in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hello My Name Is in Kaushan Script, as a solid black shape
Hello My Name Is in Kaushan Script. The preview is the SVG file itself.

“Hello My Name Is” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size100 × 48 mm (3.94 × 1.89 in), scales to any size
Pieces13 separate pieces
Outlines to cut17: 13 outer edges and 4 cut-outs
Cut length852 mm at this size
Narrowest part0.7 mm at this size
Nodes373 curve and line segments

Measured from the file. PNG: 2,000 × 1,002 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.48 in (25 × 12 mm)0.18 mm216 mm170Too fine for most machines
2 × 0.96 in (51 × 24 mm)0.36 mm433 mm50Too fine for most machines
3 × 1.44 in (76 × 37 mm)0.53 mm649 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.92 in (102 × 49 mm)0.71 mm866 mm10Fine detail: vinyl and paper only, weed with care
6 × 2.89 in (152 × 73 mm)1.1 mm1,298 mm3Vinyl, card and thin sheet
8 × 3.85 in (203 × 98 mm)1.4 mm1,731 mm3Vinyl, card and thin sheet
12 × 5.77 in (305 × 147 mm)2.1 mm2,597 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hello My Name Is SVG files

← Hello My Name Is in Lobster All 13 Hello My Name Is designs Hello My Name Is in Lilita One →