Free Happy Birthday SVG

Happy Birthday stencil plate SVG

Happy Birthday stencil plate, as a solid black shape — Happy Birthday stencil plate. The preview is the SVG file itself.

A rounded plate with “HAPPY BIRTHDAY” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 65 mm (3.94 × 2.57 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	14: 1 outer edge and 13 cut-outs
Cut length	1,367 mm at this size
Narrowest part	0.9 mm at this size
Nodes	191 curve and line segments

Measured from the file. PNG: 2,000 × 1,335 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.65 in (25 × 17 mm)	0.23 mm	347 mm	140	Too fine for most machines
2 × 1.31 in (51 × 33 mm)	0.46 mm	694 mm	40	Too fine for most machines
3 × 1.96 in (76 × 50 mm)	0.69 mm	1,042 mm	15	Fine detail: vinyl and paper only, weed with care
4 × 2.62 in (102 × 66 mm)	0.91 mm	1,389 mm	8	Fine detail: vinyl and paper only, weed with care
6 × 3.92 in (152 × 100 mm)	1.4 mm	2,083 mm	2	Vinyl, card and thin sheet
8 × 5.23 in (203 × 133 mm)	1.8 mm	2,778 mm	2	Vinyl, card and thin sheet
12 × 7.85 in (305 × 199 mm)	2.7 mm	4,167 mm	1	Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Birthday SVG files

← Happy Birthday outline lettering All 12 Happy Birthday designs Happy Birthday with a drop shadow →