Free Happy Birthday SVG

Happy Birthday in Amatic SC SVG

Happy Birthday in Amatic SC, as a solid black shape — Happy Birthday in Amatic SC. The preview is the SVG file itself.

“Happy Birthday” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 84 mm (3.94 × 3.3 in), scales to any size
Pieces	13 separate pieces
Outlines to cut	21: 13 outer edges and 8 cut-outs
Cut length	1,486 mm at this size
Narrowest part	1.3 mm at this size
Nodes	526 curve and line segments

Measured from the file. PNG: 2,000 × 1,690 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.84 in (25 × 21 mm)	0.33 mm	377 mm	110	Too fine for most machines
2 × 1.68 in (51 × 43 mm)	0.66 mm	755 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.52 in (76 × 64 mm)	0.99 mm	1,132 mm	12	Fine detail: vinyl and paper only, weed with care
4 × 3.36 in (102 × 85 mm)	1.3 mm	1,510 mm	6	Vinyl, card and thin sheet
6 × 5.03 in (152 × 128 mm)	2 mm	2,265 mm	2	Vinyl, card and thin sheet
8 × 6.71 in (203 × 170 mm)	2.6 mm	3,020 mm	1	Vinyl, card and thin sheet
12 × 10.07 in (305 × 256 mm)	4 mm	4,529 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Birthday SVG files

← Happy Birthday in Alfa Slab One All 12 Happy Birthday designs Happy Birthday in block capitals →