Free Happy Birthday SVG

Happy Birthday in Alfa Slab One SVG

Happy Birthday in Alfa Slab One, as a solid black shape — Happy Birthday in Alfa Slab One. The preview is the SVG file itself.

“Happy Birthday” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 47 mm (3.94 × 1.85 in), scales to any size
Pieces	14 separate pieces
Outlines to cut	21: 14 outer edges and 7 cut-outs
Cut length	941 mm at this size
Narrowest part	2.2 mm at this size
Nodes	506 curve and line segments

Measured from the file. PNG: 2,000 × 983 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.47 in (25 × 12 mm)	0.56 mm	239 mm	180	Fine detail: vinyl and paper only, weed with care
2 × 0.94 in (51 × 24 mm)	1.1 mm	478 mm	50	Vinyl, card and thin sheet
3 × 1.41 in (76 × 36 mm)	1.7 mm	717 mm	21	Vinyl, card and thin sheet
4 × 1.88 in (102 × 48 mm)	2.2 mm	956 mm	10	Vinyl, card and thin sheet
6 × 2.83 in (152 × 72 mm)	3.4 mm	1,434 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.77 in (203 × 96 mm)	4.5 mm	1,912 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.65 in (305 × 144 mm)	6.7 mm	2,868 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Birthday SVG files

← Happy Birthday in Lilita One All 12 Happy Birthday designs Happy Birthday in Amatic SC →