Happy Birthday in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Happy Birthday” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 54 mm (3.94 × 2.11 in), scales to any size |
|---|---|
| Pieces | 14 separate pieces |
| Outlines to cut | 21: 14 outer edges and 7 cut-outs |
| Cut length | 891 mm at this size |
| Narrowest part | 2.8 mm at this size |
| Nodes | 260 curve and line segments |
Measured from the file. PNG: 2,000 × 1,106 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.54 in (25 × 14 mm) | 0.71 mm | 226 mm | 160 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.07 in (51 × 27 mm) | 1.4 mm | 453 mm | 45 | Vinyl, card and thin sheet |
| 3 × 1.61 in (76 × 41 mm) | 2.1 mm | 679 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.14 in (102 × 54 mm) | 2.8 mm | 905 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.21 in (152 × 82 mm) | 4.3 mm | 1,358 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.28 in (203 × 109 mm) | 5.7 mm | 1,811 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.42 in (305 × 163 mm) | 8.5 mm | 2,716 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Happy Birthday SVG files
-
Happy Birthday in Alfa Slab One Solid · 14 pieces
-
Happy Birthday in Amatic SC Solid · 13 pieces
-
Happy Birthday in block capitals Solid · 13 pieces
-
Happy Birthday in script and capitals Solid · 9 pieces
-
Happy Birthday with stars Solid · 14 pieces
-
Happy Birthday outline lettering Outline · 17 pieces
-
Happy Birthday stencil plate Solid · one piece
-
Happy Birthday with a drop shadow Layered · 6 pieces
← Happy Birthday in Kaushan Script All 13 Happy Birthday designs Happy Birthday in Alfa Slab One →