Free hammock SVG

Hammock between two palms at sunset SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hammock between two palms at sunset, as a solid black shape
Hammock between two palms at sunset. The preview is the SVG file itself.

A hammock between two palms on a low rise of sand, with half a sun going down on the horizon behind it. One piece with a flat base. A fine gap parts the hammock from the sun where it hangs in front.

What is in the file

Size100 × 88 mm (3.94 × 3.44 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length1,137 mm at this size
Narrowest part1.7 mm at this size
Nodes326 curve and line segments

Measured from the file. PNG: 2,000 × 1,760 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.88 in (25 × 22 mm)0.43 mm289 mm110Too fine for most machines
2 × 1.75 in (51 × 44 mm)0.86 mm578 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.63 in (76 × 67 mm)1.3 mm866 mm12Vinyl, card and thin sheet
4 × 3.5 in (102 × 89 mm)1.7 mm1,155 mm6Vinyl, card and thin sheet
6 × 5.25 in (152 × 133 mm)2.6 mm1,733 mm2Vinyl, card and thin sheet
8 × 7 in (203 × 178 mm)3.5 mm2,310 mm1Any material, including 3 mm wood and acrylic
12 × 10.5 in (305 × 267 mm)5.2 mm3,466 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hammock SVG files

← Hammock silhouette between two trees All 12 hammocks Hammock with spreader bars and a fringe →