Free hammock SVG

Hammock badge with two palms SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hammock badge with two palms, as a solid black shape
Hammock badge with two palms. The preview is the SVG file itself.

A round badge: a hammock between two palms on the sand, cut off by a ring at the edge. One piece, for stickers, coasters, luggage tags and the lid of a holiday box.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length1,285 mm at this size
Narrowest part1.5 mm at this size
Nodes264 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.38 mm326 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.76 mm653 mm25Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)1.1 mm979 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)1.5 mm1,306 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)2.3 mm1,958 mm1Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)3 mm2,611 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)4.6 mm3,917 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hammock SVG files

← Hammock with a plain bed for a name All 12 hammocks Hammock outline on a stand →