Hammock with spreader bars and a fringe SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The hammock on its own, laid out flat: a ring at each end, three cords to a spreader bar, a bed with three stripes and a fringe of thirteen tassels along its lower edge. One piece, the same on both sides.
What is in the file
| Size | 100 × 37 mm (3.94 × 1.45 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 10: 1 outer edge and 9 cut-outs |
| Cut length | 808 mm at this size |
| Narrowest part | 1.4 mm at this size |
| Nodes | 168 curve and line segments |
| Symmetry | Mirror |
| Also found as | Hammock for SVG |
Measured from the file. PNG: 2,000 × 785 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.37 in (25 × 9 mm) | 0.36 mm | 205 mm | 210 | Too fine for most machines |
| 2 × 0.74 in (51 × 19 mm) | 0.71 mm | 410 mm | 65 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.1 in (76 × 28 mm) | 1.1 mm | 616 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.47 in (102 × 37 mm) | 1.4 mm | 821 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.21 in (152 × 56 mm) | 2.1 mm | 1,231 mm | 5 | Vinyl, card and thin sheet |
| 8 × 2.94 in (203 × 75 mm) | 2.8 mm | 1,642 mm | 3 | Vinyl, card and thin sheet |
| 12 × 4.42 in (305 × 112 mm) | 4.3 mm | 2,463 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More hammock SVG files
-
Hammock with a sun hat and two feet Solid · one piece -
Hammock with a sleeping cat Solid · one piece -
Hammock under a tarp between two pines Solid · one piece -
Hammock chair with a fringe Solid · one piece -
Hammock with a plain bed for a name Solid · one piece -
Hammock badge with two palms Solid · one piece -
Hammock outline on a stand Outline · one piece -
Layered hammock between palms at sunset Layered · 5 pieces
← Hammock between two palms at sunset All 12 hammocks Hammock with a sun hat and two feet →