Free hamburger SVG

Heart-shaped hamburger SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Heart-shaped hamburger, as a solid black shape
Heart-shaped hamburger. The preview is the SVG file itself.

A heart cut into the layers of a burger: seeds on the two lobes, a straight line under the bun, a frilled line for lettuce, tomato, melting cheese and a patty, with the point as the bottom bun.

What is in the file

Size100 × 90 mm (3.94 × 3.56 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length1,164 mm at this size
Narrowest part2.3 mm at this size
Nodes276 curve and line segments

Measured from the file. PNG: 2,000 × 1,815 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)0.58 mm296 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.81 in (51 × 46 mm)1.2 mm591 mm30Vinyl, card and thin sheet
3 × 2.71 in (76 × 69 mm)1.8 mm887 mm12Vinyl, card and thin sheet
4 × 3.62 in (102 × 92 mm)2.3 mm1,183 mm6Vinyl, card and thin sheet
6 × 5.42 in (152 × 138 mm)3.5 mm1,774 mm2Any material, including 3 mm wood and acrylic
8 × 7.23 in (203 × 184 mm)4.7 mm2,365 mm1Any material, including 3 mm wood and acrylic
12 × 10.85 in (305 × 276 mm)7 mm3,548 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hamburger SVG files

← Hamburger with a blank flag for a name All 15 hamburgers Hamburger silhouette on a plate →