Free hamburger SVG

Hamburger with a blank flag for a name SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hamburger with a blank flag for a name. The preview is the SVG file itself.

The full burger with a pick through the bun and a small empty flag flying from it. The flag is an open frame, so a name, a table number or a word can be added in a second colour.

What is in the file

Size	87 × 100 mm (3.42 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	14: 1 outer edge and 13 cut-outs
Cut length	1,346 mm at this size
Narrowest part	1.8 mm at this size
Nodes	239 curve and line segments

Measured from the file. PNG: 1,746 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.87 × 1 in (22 × 25 mm)	0.46 mm	342 mm	110	Too fine for most machines
1.74 × 2 in (44 × 51 mm)	0.91 mm	684 mm	30	Fine detail: vinyl and paper only, weed with care
2.6 × 3 in (66 × 76 mm)	1.4 mm	1,026 mm	12	Vinyl, card and thin sheet
3.47 × 4 in (88 × 102 mm)	1.8 mm	1,368 mm	6	Vinyl, card and thin sheet
5.21 × 6 in (132 × 152 mm)	2.7 mm	2,051 mm	2	Vinyl, card and thin sheet
6.94 × 8 in (176 × 203 mm)	3.7 mm	2,735 mm	1	Any material, including 3 mm wood and acrylic
10.42 × 12 in (265 × 305 mm)	5.5 mm	4,103 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hamburger SVG files

← Hamburger menu icon of three bars All 15 hamburgers Heart-shaped hamburger →