Free hamburger SVG

Hamburger outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hamburger outline, drawn as a line
Hamburger outline. The preview is the SVG file itself.

The burger drawn as an even line: each part outlined where it shows, with the cheese corners over the patty and the lettuce frill over the tomato. For colouring pages, foil and pen plotters.

What is in the file

Size100 × 86 mm (3.94 × 3.4 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length1,517 mm at this size
Narrowest part2.2 mm at this size
Nodes223 curve and line segments

Measured from the file. PNG: 2,000 × 1,738 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.86 in (25 × 22 mm)0.56 mm385 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.73 in (51 × 44 mm)1.1 mm771 mm30Vinyl, card and thin sheet
3 × 2.59 in (76 × 66 mm)1.7 mm1,156 mm12Vinyl, card and thin sheet
4 × 3.46 in (102 × 88 mm)2.2 mm1,541 mm6Vinyl, card and thin sheet
6 × 5.18 in (152 × 132 mm)3.4 mm2,312 mm2Any material, including 3 mm wood and acrylic
8 × 6.91 in (203 × 176 mm)4.5 mm3,083 mm1Any material, including 3 mm wood and acrylic
12 × 10.37 in (305 × 263 mm)6.7 mm4,624 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hamburger SVG files

← Hamburger silhouette on a plate All 15 hamburgers Layered hamburger in seven colours →