Halo with wings SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A halo with a small wing fixed to each end of the ring, each with four feather tips and three slits. The wings are part of the ring, so it is one piece. Not a pair of wings with a halo above: the halo is the subject here.
What is in the file
| Size | 100 × 31 mm (3.94 × 1.24 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 472 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 110 curve and line segments |
| Symmetry | Mirror |
| Also found as | Wings and halo SVG |
Measured from the file. PNG: 2,000 × 681 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.31 in (25 × 8 mm) | 0.64 mm | 120 mm | 230 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.63 in (51 × 16 mm) | 1.3 mm | 240 mm | 70 | Vinyl, card and thin sheet |
| 3 × 0.94 in (76 × 24 mm) | 1.9 mm | 360 mm | 30 | Vinyl, card and thin sheet |
| 4 × 1.26 in (102 × 32 mm) | 2.5 mm | 480 mm | 16 | Vinyl, card and thin sheet |
| 6 × 1.88 in (152 × 48 mm) | 3.8 mm | 719 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.51 in (203 × 64 mm) | 5.1 mm | 959 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 3.77 in (305 × 96 mm) | 7.6 mm | 1,439 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More halo SVG files
-
Halo and horns Solid · one piece -
Broken halo Solid · 2 pieces -
Halo of stars Solid · 13 pieces -
Floral halo with daisies Solid · one piece -
Round halo with rays, as in old paintings Solid · one piece -
Halo on a round frame Solid · one piece -
Halo on a cloud Solid · one piece -
Two halos linked Solid · one piece