Free halo SVG

Halo of stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Halo of stars, as a solid black shape — Halo of stars. The preview is the SVG file itself.

Thirteen five-pointed stars set round the oval in place of a ring, larger at the front and smaller at the back so the circle still reads as tipped away. Loose pieces for vinyl.

What is in the file

Size	100 × 42 mm (3.94 × 1.66 in), scales to any size
Pieces	13 separate pieces
Outlines to cut	13 outlines
Cut length	483 mm at this size
Narrowest part	3.5 mm at this size
Nodes	325 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 888 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.42 in (25 × 11 mm)	0.89 mm	123 mm	190	Fine detail: vinyl and paper only, weed with care
2 × 0.84 in (51 × 21 mm)	1.8 mm	245 mm	55	Vinyl, card and thin sheet
3 × 1.27 in (76 × 32 mm)	2.7 mm	368 mm	24	Vinyl, card and thin sheet
4 × 1.69 in (102 × 43 mm)	3.6 mm	491 mm	12	Any material, including 3 mm wood and acrylic
6 × 2.53 in (152 × 64 mm)	5.3 mm	736 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.38 in (203 × 86 mm)	7.1 mm	981 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.06 in (305 × 129 mm)	11 mm	1,472 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More halo SVG files

← Broken halo All 14 halos Floral halo with daisies →