Halo silhouette on a head and shoulders SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A head and shoulders with no face, with the flat round halo of old paintings behind the head, welded to the shoulders. One piece with a flat base, made for shadow boxes and memorial scenes.
What is in the file
| Size | 85 × 100 mm (3.34 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 641 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 35 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,708 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.85 × 1 in (22 × 25 mm) | Over 1.5 mm | 163 mm | 110 | Vinyl, card and thin sheet |
| 1.7 × 2 in (43 × 51 mm) | Over 3 mm | 326 mm | 30 | Any material, including 3 mm wood and acrylic |
| 2.54 × 3 in (65 × 76 mm) | Over 4.6 mm | 488 mm | 12 | Any material, including 3 mm wood and acrylic |
| 3.39 × 4 in (86 × 102 mm) | Over 6.1 mm | 651 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.09 × 6 in (129 × 152 mm) | Over 9.1 mm | 977 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.78 × 8 in (172 × 203 mm) | Over 12 mm | 1,303 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.18 × 12 in (258 × 305 mm) | Over 18 mm | 1,954 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More halo SVG files
-
Layered gold halo in three colours Layered · 3 pieces -
Classic halo Solid · one piece -
Shining halo with rays Solid · one piece -
Halo outline Outline · 2 pieces -
Halo with wings Solid · one piece -
Halo and horns Solid · one piece -
Broken halo Solid · 2 pieces -
Halo of stars Solid · 13 pieces
← Two halos linked All 14 halos Layered gold halo in three colours →