Free halo SVG

Halo outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Halo outline, drawn as a line — Halo outline. The preview is the SVG file itself.

The ring drawn as two fine lines about 2 mm wide, one for its outer edge and one for its inner edge, as two loose ovals. For foil, engraving and pen plotters.

What is in the file

Size	100 × 35 mm (3.94 × 1.39 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	4: 2 outer edges and 2 cut-outs
Cut length	781 mm at this size
Narrowest part	2.1 mm at this size
Nodes	65 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 758 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.35 in (25 × 9 mm)	0.53 mm	198 mm	220	Fine detail: vinyl and paper only, weed with care
2 × 0.71 in (51 × 18 mm)	1.1 mm	397 mm	65	Vinyl, card and thin sheet
3 × 1.06 in (76 × 27 mm)	1.6 mm	595 mm	27	Vinyl, card and thin sheet
4 × 1.42 in (102 × 36 mm)	2.1 mm	793 mm	14	Vinyl, card and thin sheet
6 × 2.12 in (152 × 54 mm)	3.2 mm	1,190 mm	5	Any material, including 3 mm wood and acrylic
8 × 2.83 in (203 × 72 mm)	4.3 mm	1,587 mm	4	Any material, including 3 mm wood and acrylic
12 × 4.25 in (305 × 108 mm)	6.4 mm	2,380 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More halo SVG files

← Shining halo with rays All 14 halos Halo with wings →