Free halo SVG

Halo on a cloud SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Halo on a cloud, as a solid black shape — Halo on a cloud. The preview is the SVG file itself.

A cloud with four round lobes and a flat foot, with a halo perched at a tilt on its highest lobe. One piece, for nursery walls, christening cards and memorial keepsakes.

What is in the file

Size	100 × 73 mm (3.94 × 2.87 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	410 mm at this size
Narrowest part	2.8 mm at this size
Nodes	56 curve and line segments

Measured from the file. PNG: 2,000 × 1,479 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.73 in (25 × 19 mm)	0.71 mm	104 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.46 in (51 × 37 mm)	1.4 mm	208 mm	35	Vinyl, card and thin sheet
3 × 2.19 in (76 × 56 mm)	2.1 mm	312 mm	15	Vinyl, card and thin sheet
4 × 2.92 in (102 × 74 mm)	2.8 mm	417 mm	6	Vinyl, card and thin sheet
6 × 4.37 in (152 × 111 mm)	4.3 mm	625 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.83 in (203 × 148 mm)	5.7 mm	833 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.75 in (305 × 222 mm)	8.5 mm	1,250 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More halo SVG files

← Halo on a round frame All 14 halos Two halos linked →