Free grill SVG

Grilled kebab on a skewer SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Grilled kebab on a skewer, as a solid black shape
Grilled kebab on a skewer. The preview is the SVG file itself.

A cube of meat, a tomato, a square of pepper and a slice of onion threaded on a skewer with a ring at one end and a point at the other. A little of the skewer shows between each piece and the next.

What is in the file

Size100 × 41 mm (3.94 × 1.61 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length384 mm at this size
Narrowest part3.2 mm at this size
Nodes66 curve and line segments

Measured from the file. PNG: 2,000 × 865 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.41 in (25 × 10 mm)0.81 mm98 mm200Fine detail: vinyl and paper only, weed with care
2 × 0.82 in (51 × 21 mm)1.6 mm195 mm55Vinyl, card and thin sheet
3 × 1.23 in (76 × 31 mm)2.4 mm293 mm24Vinyl, card and thin sheet
4 × 1.64 in (102 × 42 mm)3.3 mm390 mm12Any material, including 3 mm wood and acrylic
6 × 2.46 in (152 × 62 mm)4.9 mm585 mm4Any material, including 3 mm wood and acrylic
8 × 3.28 in (203 × 83 mm)6.5 mm780 mm3Any material, including 3 mm wood and acrylic
12 × 4.92 in (305 × 125 mm)9.8 mm1,170 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More grill SVG files

← Grilled T-bone steak All 15 grills Grill fork with a sausage →