Barrel smoker grill with a firebox SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
An offset smoker: a barrel on its side with a lid handle and a thermometer, a firebox low at one end, a chimney at the other, two legs with a shelf and one wheel. For pitmaster shirts and competition signs.
What is in the file
| Size | 84 × 100 mm (3.31 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 759 mm at this size |
| Narrowest part | 3.2 mm at this size |
| Nodes | 82 curve and line segments |
| Also found as | BBQ smoker SVG |
Measured from the file. PNG: 1,692 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.84 × 1 in (21 × 25 mm) | 0.81 mm | 193 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 1.68 × 2 in (43 × 51 mm) | 1.6 mm | 386 mm | 30 | Vinyl, card and thin sheet |
| 2.52 × 3 in (64 × 76 mm) | 2.4 mm | 578 mm | 12 | Vinyl, card and thin sheet |
| 3.36 × 4 in (85 × 102 mm) | 3.3 mm | 771 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.04 × 6 in (128 × 152 mm) | 4.9 mm | 1,157 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.72 × 8 in (171 × 203 mm) | 6.5 mm | 1,542 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.08 × 12 in (256 × 305 mm) | 9.8 mm | 2,313 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More grill SVG files
-
Bullet smoker grill Solid · one piece -
Crossed grill spatula and fork Solid · one piece -
Grill tool set: spatula, fork and tongs Solid · 3 pieces -
Barbecue grill badge in a ring Solid · one piece -
Steak on a grill over flames Solid · one piece -
Grilled T-bone steak Solid · one piece -
Grilled kebab on a skewer Solid · one piece -
Grill fork with a sausage Solid · one piece
← Gas grill on a cabinet All 15 grills Bullet smoker grill →