Free Great Dane SVG

Great Dane paw print badge SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Great Dane paw print badge. The preview is the SVG file itself.

A paw print with the long Great Dane face in place of the big pad and four toe pads above it. Five loose pieces set out in position, for car windows, kennel signs and tote bags.

What is in the file

Size	97 × 100 mm (3.81 × 3.94 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	12: 5 outer edges and 7 cut-outs
Cut length	682 mm at this size
Narrowest part	1.9 mm at this size
Nodes	200 curve and line segments

Measured from the file. PNG: 1,940 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.97 × 1 in (25 × 25 mm)	0.48 mm	173 mm	100	Too fine for most machines
1.94 × 2 in (49 × 51 mm)	0.97 mm	346 mm	25	Fine detail: vinyl and paper only, weed with care
2.91 × 3 in (74 × 76 mm)	1.4 mm	520 mm	9	Vinyl, card and thin sheet
3.88 × 4 in (98 × 102 mm)	1.9 mm	693 mm	4	Vinyl, card and thin sheet
5.81 × 6 in (148 × 152 mm)	2.9 mm	1,039 mm	2	Vinyl, card and thin sheet
7.75 × 8 in (197 × 203 mm)	3.9 mm	1,386 mm	1	Any material, including 3 mm wood and acrylic
11.63 × 12 in (295 × 305 mm)	5.8 mm	2,079 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Great Dane SVG files

← Great Dane outline All 14 Great Danes Great Dane monogram frame →