Free Great Dane SVG

Great Dane outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Great Dane outline, drawn as a line — Great Dane outline. The preview is the SVG file itself.

The standing Great Dane as one even line about 2 mm wide in a closed loop, with nothing inside it. For colouring pages, foil, engraving and pen plotters.

What is in the file

Size	100 × 80 mm (3.94 × 3.16 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	957 mm at this size
Narrowest part	2.1 mm at this size
Nodes	301 curve and line segments

Measured from the file. PNG: 2,000 × 1,621 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.8 in (25 × 20 mm)	0.53 mm	243 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.61 in (51 × 41 mm)	1.1 mm	486 mm	30	Vinyl, card and thin sheet
3 × 2.41 in (76 × 61 mm)	1.6 mm	729 mm	12	Vinyl, card and thin sheet
4 × 3.21 in (102 × 82 mm)	2.1 mm	972 mm	6	Vinyl, card and thin sheet
6 × 4.82 in (152 × 122 mm)	3.2 mm	1,458 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.42 in (203 × 163 mm)	4.3 mm	1,945 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.64 in (305 × 245 mm)	6.4 mm	2,917 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Great Dane SVG files

← Great Dane sitting on a bone All 14 Great Danes Great Dane paw print badge →