Free Great Dane SVG

Peeking Great Dane SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Peeking Great Dane, as a solid black shape
Peeking Great Dane. The preview is the SVG file itself.

The top of a Great Dane face looking over a ledge: folded ears, calm eyes under short brows, the big nose resting on the edge and two large paws hooked over. For car windows, mugs and laptop lids.

What is in the file

Size100 × 48 mm (3.94 × 1.91 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length548 mm at this size
Narrowest part1.4 mm at this size
Nodes117 curve and line segments

Measured from the file. PNG: 2,000 × 1,008 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.48 in (25 × 12 mm)0.36 mm139 mm170Too fine for most machines
2 × 0.97 in (51 × 25 mm)0.71 mm278 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.45 in (76 × 37 mm)1.1 mm418 mm21Vinyl, card and thin sheet
4 × 1.94 in (102 × 49 mm)1.4 mm557 mm10Vinyl, card and thin sheet
6 × 2.9 in (152 × 74 mm)2.1 mm835 mm3Vinyl, card and thin sheet
8 × 3.87 in (203 × 98 mm)2.8 mm1,114 mm2Vinyl, card and thin sheet
12 × 5.81 in (305 × 148 mm)4.3 mm1,670 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Great Dane SVG files

← Great Dane monogram frame All 14 Great Danes Layered fawn Great Dane in five colours →