Free Grateful SVG

Grateful in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Grateful in Alfa Slab One, as a solid black shape
Grateful in Alfa Slab One. The preview is the SVG file itself.

“Grateful” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 19 mm (3.94 × 0.73 in), scales to any size
Pieces8 separate pieces
Outlines to cut10: 8 outer edges and 2 cut-outs
Cut length533 mm at this size
Narrowest part2.3 mm at this size
Nodes145 curve and line segments

Measured from the file. PNG: 2,000 × 433 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.19 in (25 × 5 mm)0.58 mm135 mm310Fine detail: vinyl and paper only, weed with care
2 × 0.37 in (51 × 9 mm)1.2 mm271 mm105Vinyl, card and thin sheet
3 × 0.55 in (76 × 14 mm)1.8 mm406 mm48Vinyl, card and thin sheet
4 × 0.74 in (102 × 19 mm)2.3 mm542 mm24Vinyl, card and thin sheet
6 × 1.11 in (152 × 28 mm)3.5 mm812 mm9Any material, including 3 mm wood and acrylic
8 × 1.48 in (203 × 38 mm)4.7 mm1,083 mm7Any material, including 3 mm wood and acrylic
12 × 2.22 in (305 × 56 mm)7 mm1,625 mm5Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Grateful SVG files

← Grateful in Lilita One All 13 Grateful designs Grateful in Amatic SC →