Grateful in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Grateful” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 21 mm (3.94 × 0.81 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 10: 8 outer edges and 2 cut-outs |
| Cut length | 510 mm at this size |
| Narrowest part | 3 mm at this size |
| Nodes | 166 curve and line segments |
Measured from the file. PNG: 2,000 × 475 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.21 in (25 × 5 mm) | 0.76 mm | 130 mm | 290 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.41 in (51 × 11 mm) | 1.5 mm | 259 mm | 95 | Vinyl, card and thin sheet |
| 3 × 0.62 in (76 × 16 mm) | 2.3 mm | 389 mm | 42 | Vinyl, card and thin sheet |
| 4 × 0.83 in (102 × 21 mm) | 3 mm | 518 mm | 22 | Any material, including 3 mm wood and acrylic |
| 6 × 1.24 in (152 × 32 mm) | 4.6 mm | 777 mm | 8 | Any material, including 3 mm wood and acrylic |
| 8 × 1.66 in (203 × 42 mm) | 6.1 mm | 1,036 mm | 6 | Any material, including 3 mm wood and acrylic |
| 12 × 2.48 in (305 × 63 mm) | 9.1 mm | 1,554 mm | 4 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Grateful SVG files
-
Grateful in Alfa Slab One Solid · 8 pieces
-
Grateful in Amatic SC Solid · 8 pieces
-
Grateful in block capitals Solid · 8 pieces
-
Grateful with a swash underline Solid · 2 pieces
-
Grateful with hearts Solid · 10 pieces
-
Grateful outline lettering Outline · 9 pieces
-
Grateful stencil plate Solid · one piece
-
Grateful with a drop shadow Layered · 2 pieces
← Grateful in Kaushan Script All 13 Grateful designs Grateful in Alfa Slab One →