Free Grateful SVG

Grateful stencil plate SVG

Grateful stencil plate, as a solid black shape — Grateful stencil plate. The preview is the SVG file itself.

A rounded plate with “GRATEFUL” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 33 mm (3.94 × 1.3 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	772 mm at this size
Narrowest part	0.9 mm at this size
Nodes	116 curve and line segments

Measured from the file. PNG: 2,000 × 712 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.33 in (25 × 8 mm)	0.23 mm	196 mm	230	Too fine for most machines
2 × 0.66 in (51 × 17 mm)	0.46 mm	392 mm	70	Too fine for most machines
3 × 0.99 in (76 × 25 mm)	0.69 mm	588 mm	30	Fine detail: vinyl and paper only, weed with care
4 × 1.32 in (102 × 34 mm)	0.91 mm	784 mm	16	Fine detail: vinyl and paper only, weed with care
6 × 1.98 in (152 × 50 mm)	1.4 mm	1,177 mm	5	Vinyl, card and thin sheet
8 × 2.64 in (203 × 67 mm)	1.8 mm	1,569 mm	4	Vinyl, card and thin sheet
12 × 3.96 in (305 × 101 mm)	2.7 mm	2,353 mm	2	Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Grateful SVG files

← Grateful outline lettering All 12 Grateful designs Grateful with a drop shadow →