Grateful in block capitals SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“GRATEFUL” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.
What is in the file
| Size | 100 × 25 mm (3.94 × 0.97 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 10: 8 outer edges and 2 cut-outs |
| Cut length | 735 mm at this size |
| Narrowest part | 2.8 mm at this size |
| Nodes | 106 curve and line segments |
Measured from the file. PNG: 2,000 × 552 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.25 in (25 × 6 mm) | 0.71 mm | 187 mm | 270 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.49 in (51 × 13 mm) | 1.4 mm | 373 mm | 85 | Vinyl, card and thin sheet |
| 3 × 0.74 in (76 × 19 mm) | 2.1 mm | 560 mm | 36 | Vinyl, card and thin sheet |
| 4 × 0.99 in (102 × 25 mm) | 2.8 mm | 747 mm | 20 | Vinyl, card and thin sheet |
| 6 × 1.48 in (152 × 38 mm) | 4.3 mm | 1,120 mm | 7 | Any material, including 3 mm wood and acrylic |
| 8 × 1.98 in (203 × 50 mm) | 5.7 mm | 1,494 mm | 5 | Any material, including 3 mm wood and acrylic |
| 12 × 2.96 in (305 × 75 mm) | 8.5 mm | 2,240 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Grateful SVG files
-
Grateful with a swash underline Solid · 2 pieces
-
Grateful with hearts Solid · 10 pieces
-
Grateful outline lettering Outline · 9 pieces
-
Grateful stencil plate Solid · one piece
-
Grateful with a drop shadow Layered · 2 pieces
-
Grateful with three ears of wheat Solid · 5 pieces
-
Grateful in Pacifico Solid · one piece
-
Grateful in Lobster Solid · 4 pieces
← Grateful in Amatic SC All 13 Grateful designs Grateful with a swash underline →