Free Grandma SVG

Grandma in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Grandma in Amatic SC, as a solid black shape
Grandma in Amatic SC. The preview is the SVG file itself.

“Grandma” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 32 mm (3.94 × 1.28 in), scales to any size
Pieces7 separate pieces
Outlines to cut11: 7 outer edges and 4 cut-outs
Cut length932 mm at this size
Narrowest part1.8 mm at this size
Nodes286 curve and line segments

Measured from the file. PNG: 2,000 × 700 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.32 in (25 × 8 mm)0.46 mm237 mm230Too fine for most machines
2 × 0.65 in (51 × 16 mm)0.91 mm473 mm70Fine detail: vinyl and paper only, weed with care
3 × 0.97 in (76 × 25 mm)1.4 mm710 mm30Vinyl, card and thin sheet
4 × 1.3 in (102 × 33 mm)1.8 mm947 mm16Vinyl, card and thin sheet
6 × 1.94 in (152 × 49 mm)2.7 mm1,420 mm5Vinyl, card and thin sheet
8 × 2.59 in (203 × 66 mm)3.7 mm1,894 mm4Any material, including 3 mm wood and acrylic
12 × 3.89 in (305 × 99 mm)5.5 mm2,841 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Grandma SVG files

← Grandma in Alfa Slab One All 13 Grandma designs Grandma in block capitals →