Free Grandma SVG

Grandma outline lettering SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Grandma outline lettering, drawn as a line
Grandma outline lettering. The preview is the SVG file itself.

“Grandma” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

What is in the file

Size100 × 17 mm (3.94 × 0.68 in), scales to any size
Pieces8 separate pieces
Outlines to cut18: 8 outer edges and 10 cut-outs
Cut length846 mm at this size
Narrowest part1.3 mm at this size
Nodes300 curve and line segments

Measured from the file. PNG: 2,000 × 410 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.17 in (25 × 4 mm)0.33 mm215 mm320Too fine for most machines
2 × 0.35 in (51 × 9 mm)0.66 mm430 mm110Fine detail: vinyl and paper only, weed with care
3 × 0.52 in (76 × 13 mm)0.99 mm645 mm48Fine detail: vinyl and paper only, weed with care
4 × 0.69 in (102 × 18 mm)1.3 mm860 mm26Vinyl, card and thin sheet
6 × 1.04 in (152 × 26 mm)2 mm1,289 mm9Vinyl, card and thin sheet
8 × 1.38 in (203 × 35 mm)2.6 mm1,719 mm7Vinyl, card and thin sheet
12 × 2.08 in (305 × 53 mm)4 mm2,579 mm5Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Grandma SVG files

← Grandma with hearts All 13 Grandma designs Grandma stencil plate →