Free graduation cap SVG

Graduation cap with a tassel SVG

Graduation cap with a tassel, as a solid black shape — Graduation cap with a tassel. The preview is the SVG file itself.

The mortarboard from a little above: a diamond board over a skull cap, a button in the middle, the cord running to the edge and a tassel hanging down the right side.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 71 mm (3.94 × 2.8 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	690 mm at this size
Narrowest part	2.2 mm at this size
Nodes	81 curve and line segments

Measured from the file. PNG: 2,000 × 1,444 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.71 in (25 × 18 mm)	0.56 mm	175 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.42 in (51 × 36 mm)	1.1 mm	351 mm	35	Vinyl, card and thin sheet
3 × 2.13 in (76 × 54 mm)	1.7 mm	526 mm	15	Vinyl, card and thin sheet
4 × 2.84 in (102 × 72 mm)	2.2 mm	701 mm	8	Vinyl, card and thin sheet
6 × 4.27 in (152 × 108 mm)	3.4 mm	1,052 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.69 in (203 × 144 mm)	4.5 mm	1,402 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.53 in (305 × 217 mm)	6.7 mm	2,103 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More graduation cap SVG files

← Graduation cap over a name banner All 14 graduation caps Tilted graduation cap →