Free graduation cap SVG

Graduation cap over a name banner SVG

Graduation cap over a name banner. The preview is the SVG file itself.

A cap above a ribbon banner with folded ends, left open in the middle for a name or a class. The cap and the banner are welded where they meet.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 69 mm (3.94 × 2.72 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	853 mm at this size
Narrowest part	1.6 mm at this size
Nodes	103 curve and line segments

Measured from the file. PNG: 2,000 × 1,406 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.69 in (25 × 18 mm)	0.41 mm	217 mm	130	Too fine for most machines
2 × 1.38 in (51 × 35 mm)	0.81 mm	433 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.07 in (76 × 53 mm)	1.2 mm	650 mm	15	Vinyl, card and thin sheet
4 × 2.76 in (102 × 70 mm)	1.6 mm	867 mm	8	Vinyl, card and thin sheet
6 × 4.15 in (152 × 105 mm)	2.4 mm	1,300 mm	2	Vinyl, card and thin sheet
8 × 5.53 in (203 × 140 mm)	3.3 mm	1,733 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.29 in (305 × 211 mm)	4.9 mm	2,600 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More graduation cap SVG files

← Graduation cap on a stack of books All 14 graduation caps Graduation cap with a tassel →