Free graduation cap SVG

Graduation cap outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Graduation cap outline, drawn as a line
Graduation cap outline. The preview is the SVG file itself.

The cap as a line drawing: board, skull cap, button, cord and a tassel with its fringe, all joined. For colouring sheets, foil and pen plotters.

What is in the file

Size100 × 72 mm (3.94 × 2.83 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length875 mm at this size
Narrowest part1.9 mm at this size
Nodes79 curve and line segments
Also found asGraduation cap icon SVG

Measured from the file. PNG: 2,000 × 1,460 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.72 in (25 × 18 mm)0.48 mm222 mm130Too fine for most machines
2 × 1.44 in (51 × 37 mm)0.97 mm445 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.16 in (76 × 55 mm)1.4 mm667 mm15Vinyl, card and thin sheet
4 × 2.88 in (102 × 73 mm)1.9 mm889 mm6Vinyl, card and thin sheet
6 × 4.31 in (152 × 110 mm)2.9 mm1,333 mm2Vinyl, card and thin sheet
8 × 5.75 in (203 × 146 mm)3.9 mm1,778 mm2Any material, including 3 mm wood and acrylic
12 × 8.63 in (305 × 219 mm)5.8 mm2,667 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More graduation cap SVG files

← Graduation cap silhouette All 14 graduation caps Mortarboard graduation cap from above →