Free golf SVG

Split golf ball for a name SVG

Split golf ball for a name, as a solid black shape — Split golf ball for a name. The preview is the SVG file itself.

A dimpled ball cut in two with a clear band between the halves, where a name goes. It comes as two pieces, top and bottom.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	98 × 100 mm (3.87 × 3.94 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	76: 2 outer edges and 74 cut-outs
Cut length	1,642 mm at this size
Narrowest part	2.9 mm at this size
Nodes	423 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,965 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.98 × 1 in (25 × 25 mm)	0.74 mm	417 mm	100	Fine detail: vinyl and paper only, weed with care
1.96 × 2 in (50 × 51 mm)	1.5 mm	834 mm	25	Vinyl, card and thin sheet
2.95 × 3 in (75 × 76 mm)	2.2 mm	1,251 mm	9	Vinyl, card and thin sheet
3.93 × 4 in (100 × 102 mm)	2.9 mm	1,668 mm	4	Vinyl, card and thin sheet
5.89 × 6 in (150 × 152 mm)	4.4 mm	2,502 mm	2	Any material, including 3 mm wood and acrylic
7.86 × 8 in (200 × 203 mm)	5.9 mm	3,337 mm	1	Any material, including 3 mm wood and acrylic
11.78 × 12 in (299 × 305 mm)	8.8 mm	5,005 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More golf SVG files

← Heart-shaped golf ball All 16 golf designs Golf bag with clubs →