Free golf SVG

Golf putter SVG

Golf putter, as a solid black shape — Golf putter. The preview is the SVG file itself.

A blade putter on a bent neck with a sight line cut into the top of the head. The shaft is 3 to 4 mm wide at this size, so cut it large in anything stiff.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	67 × 100 mm (2.65 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	285 mm at this size
Narrowest part	2.6 mm at this size
Nodes	25 curve and line segments

Measured from the file. PNG: 1,373 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.67 × 1 in (17 × 25 mm)	0.66 mm	72 mm	130	Fine detail: vinyl and paper only, weed with care
1.35 × 2 in (34 × 51 mm)	1.3 mm	145 mm	35	Vinyl, card and thin sheet
2.02 × 3 in (51 × 76 mm)	2 mm	217 mm	15	Vinyl, card and thin sheet
2.7 × 4 in (68 × 102 mm)	2.6 mm	290 mm	8	Vinyl, card and thin sheet
4.04 × 6 in (103 × 152 mm)	4 mm	434 mm	2	Any material, including 3 mm wood and acrylic
5.39 × 8 in (137 × 203 mm)	5.3 mm	579 mm	2	Any material, including 3 mm wood and acrylic
8.09 × 12 in (205 × 305 mm)	7.9 mm	869 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More golf SVG files

← Golf club: the driver All 16 golf designs Crossed golf clubs with a ball →