Golf ball on a tee SVG
A dimpled ball sitting in the cup of a tee, welded into one piece. The picture most people have in mind for a golf card, a cake topper or a club sign.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 52 × 100 mm (2.04 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 56: 1 outer edge and 55 cut-outs |
| Cut length | 874 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 267 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,075 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.52 × 1 in (13 × 25 mm) | 0.56 mm | 222 mm | 160 | Fine detail: vinyl and paper only, weed with care |
| 1.04 × 2 in (26 × 51 mm) | 1.1 mm | 444 mm | 45 | Vinyl, card and thin sheet |
| 1.56 × 3 in (40 × 76 mm) | 1.7 mm | 666 mm | 18 | Vinyl, card and thin sheet |
| 2.08 × 4 in (53 × 102 mm) | 2.2 mm | 888 mm | 10 | Vinyl, card and thin sheet |
| 3.11 × 6 in (79 × 152 mm) | 3.4 mm | 1,332 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.15 × 8 in (105 × 203 mm) | 4.5 mm | 1,776 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.23 × 12 in (158 × 305 mm) | 6.7 mm | 2,664 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Golf tee 
Golf club: the driver 
Golf putter 
Crossed golf clubs with a ball 
Golf tee shot badge 
Golf flag 
Golf hole with flag and ball 
Golf course badge 