Stocking gift card holder SVG
Two stockings joined down the back of the leg. Fold them together, glue the tabs on the leg and the sole, and the card drops in at the cuff. Cut 190 mm wide, the leg is 61 mm wide inside and 101 mm deep.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 58 mm (3.94 × 2.28 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 24: 1 outer edge and 23 cut-outs |
| Cut length | 502 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 130 curve and line segments |
Measured from the file. PNG: 2,000 × 1,192 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.58 in (25 × 15 mm) | 0.61 mm | 128 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.16 in (51 × 29 mm) | 1.2 mm | 255 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.74 in (76 × 44 mm) | 1.8 mm | 383 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.32 in (102 × 59 mm) | 2.4 mm | 510 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.48 in (152 × 88 mm) | 3.7 mm | 765 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.64 in (203 × 118 mm) | 4.9 mm | 1,020 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.96 in (305 × 177 mm) | 7.3 mm | 1,530 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More gift card holder SVG files
-
Coffee cup gift card holder Solid · one piece -
Ornament gift card holder Solid · one piece -
Gift card holder box Solid · one piece -
Birthday gift card holder with balloons Solid · one piece -
Long gift card holder for money Solid · one piece -
Envelope gift card holder to print and cut by hand Outline · 37 pieces -
Gift card holder with a coloured pointed flap Layered · 2 pieces -
Gift card holder with a pocket and flap Solid · one piece
← Christmas gift card holder with a tree All 12 gift card holders Coffee cup gift card holder →