Birthday gift card holder with balloons SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A birthday card with three balloons cut from the front and a glued pocket inside for an upright gift card. Cut 145 mm tall, it closes to 63 by 98 mm and the pocket is 47 mm deep, so the top of the card shows.
What is in the file
| Size | 94 × 100 mm (3.69 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 36: 1 outer edge and 35 cut-outs |
| Cut length | 886 mm at this size |
| Narrowest part | 0.7 mm at this size |
| Nodes | 187 curve and line segments |
Measured from the file. PNG: 1,879 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.94 × 1 in (24 × 25 mm) | 0.18 mm | 225 mm | 100 | Too fine for most machines |
| 1.87 × 2 in (48 × 51 mm) | 0.36 mm | 450 mm | 25 | Too fine for most machines |
| 2.81 × 3 in (71 × 76 mm) | 0.53 mm | 675 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 3.75 × 4 in (95 × 102 mm) | 0.71 mm | 900 mm | 6 | Fine detail: vinyl and paper only, weed with care |
| 5.62 × 6 in (143 × 152 mm) | 1.1 mm | 1,350 mm | 2 | Vinyl, card and thin sheet |
| 7.5 × 8 in (190 × 203 mm) | 1.4 mm | 1,800 mm | 1 | Vinyl, card and thin sheet |
| 11.24 × 12 in (286 × 305 mm) | 2.1 mm | 2,701 mm | 1 | Vinyl, card and thin sheet |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More gift card holder SVG files
-
Long gift card holder for money Solid · one piece
-
Envelope gift card holder to print and cut by hand Outline · 37 pieces
-
Gift card holder with a coloured pointed flap Layered · 2 pieces
-
Gift card holder with a pocket and flap Solid · one piece
-
Folded gift card holder with corner slits Solid · one piece
-
Envelope gift card holder Solid · one piece
-
Christmas gift card holder with a tree Solid · one piece
-
Stocking gift card holder Solid · one piece
← Gift card holder box All 12 gift card holders Long gift card holder for money →