Free gift card holder SVG

Ornament gift card holder SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Ornament gift card holder, as a solid black shape
Ornament gift card holder. The preview is the SVG file itself.

A bauble that opens like a book. The card sits in four corner slits on the round back, the star front folds over it, and the loop on the cap takes a ribbon. Cut 200 mm wide, each round is 108 mm across.

What is in the file

Size100 × 64 mm (3.94 × 2.52 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut22: 1 outer edge and 21 cut-outs
Cut length585 mm at this size
Narrowest part0.6 mm at this size
Nodes95 curve and line segments

Measured from the file. PNG: 2,000 × 1,308 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.64 in (25 × 16 mm)0.15 mm149 mm140Too fine for most machines
2 × 1.28 in (51 × 33 mm)0.3 mm297 mm40Too fine for most machines
3 × 1.92 in (76 × 49 mm)0.46 mm446 mm15Too fine for most machines
4 × 2.56 in (102 × 65 mm)0.61 mm594 mm8Fine detail: vinyl and paper only, weed with care
6 × 3.84 in (152 × 98 mm)0.91 mm892 mm3Fine detail: vinyl and paper only, weed with care
8 × 5.12 in (203 × 130 mm)1.2 mm1,189 mm2Vinyl, card and thin sheet
12 × 7.68 in (305 × 195 mm)1.8 mm1,783 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More gift card holder SVG files

← Coffee cup gift card holder All 12 gift card holders Gift card holder box →