Free ghost SVG

Floating ghost with a tail SVG

Floating ghost with a tail, as a solid black shape — Floating ghost with a tail. The preview is the SVG file itself.

A ghost drifting to one side, its body thinning into a pointed tail, with both arms out and a surprised face.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 96 mm (3.94 × 3.78 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	463 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	64 curve and line segments

Measured from the file. PNG: 2,000 × 1,921 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.96 in (25 × 24 mm)	Over 1.5 mm	118 mm	100	Vinyl, card and thin sheet
2 × 1.92 in (51 × 49 mm)	Over 3 mm	235 mm	25	Any material, including 3 mm wood and acrylic
3 × 2.88 in (76 × 73 mm)	Over 4.6 mm	353 mm	9	Any material, including 3 mm wood and acrylic
4 × 3.84 in (102 × 97 mm)	Over 6.1 mm	470 mm	6	Any material, including 3 mm wood and acrylic
6 × 5.75 in (152 × 146 mm)	Over 9.1 mm	706 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.67 in (203 × 195 mm)	Over 12 mm	941 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.51 in (305 × 292 mm)	Over 18 mm	1,411 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ghost SVG files

← Cute little ghost All 18 ghosts Swooping ghost →